Page 1 of 3

Best Studio Mic?

PostPosted: Mon Jan 18, 2010 8:15 pm
by chipfryer
I need one with anti rumblers on it and a vapour/breath guard to stop hisses and breath points. What are my options please?

PostPosted: Mon Jan 18, 2010 8:22 pm
by jimmydanger
Neumann's are pretty good, not cheap though ($1800-2500).

PostPosted: Mon Jan 18, 2010 8:25 pm
by chipfryer
:shock:
Gee.
I got a cheapo thing/one from the market for 5 bucks.
:D

Sounds like it too :D


jimmydanger wrote:Neumann's are pretty good, not cheap though ($1800-2500).

PostPosted: Mon Jan 18, 2010 8:32 pm
by jimmydanger
The funny thing is, you can spend thousands on a mic and then thousands more on effects to make it sound like $5 mic!

PostPosted: Mon Jan 18, 2010 9:13 pm
by RGMixProject
jimmydanger wrote:Neumann's are pretty good, not cheap though ($1800-2500).


If you get a Neumann or a Blue you will need something like this to go with them.

Image

PostPosted: Mon Jan 18, 2010 9:43 pm
by chipfryer
Fanks guys. You know what? I'll prob stick with the market bought 5 dollar mic.

Just a signal, and after all it's the song that matters isn't it?

PostPosted: Tue Jan 19, 2010 12:05 am
by KLUGMO
All parts reflect the sum, go with a SM58.

PostPosted: Tue Jan 19, 2010 1:51 am
by RGMixProject
chipfryer wrote:Fanks guys. You know what? I'll prob stick with the market bought 5 dollar mic.

Just a signal, and after all it's the song that matters isn't it?


Ok, I get it. This was a game

Wanna go fishin'
how about
snip hunting.

PostPosted: Tue Jan 19, 2010 2:42 am
by Slacker G
I just bought a large condenser mike from Musicians Friend for $199.00 it is a
MXL 4000. I LOVE it. I just recorded my first vocal with it.
Now, mind you, I can't sing. But the mike is KILLER. I have about 8 different kinds of Mikes, and this is hands down the best I have heard for home studio recording. Not only that, but you also get a $125.00 (Alice In Wonderland mfr list) pencil mike along with it for free. Here is a link to my recording . I was about 8 inches from the mike. No compressor or gate. Just me screeching into it. Screeching in a low voice at that!

http://soundclick.com/share?songid=8624066

PostPosted: Tue Jan 19, 2010 10:53 am
by chipfryer
Erm nope. It was a serious question.

Snip Hunting would be done right here on BM campus.


RGMixProject wrote:Wanna go fishin'
how about
snip hunting.

PostPosted: Tue Jan 19, 2010 7:00 pm
by Chippy
I was thinking of something more like this that has anti rumblers

Image

PostPosted: Tue Jan 19, 2010 7:50 pm
by CraigMaxim


What's your budget for this mic Chippy.

They are all over the map.

Jimmy is right, that Neumans are among the best vocal mics out there, and his figures are low even. You can pay $3,000 to $5,000 dollars for the top of the lin Neumans.

You can also find a decent condensor mic for $250 or so.

PostPosted: Tue Jan 19, 2010 7:54 pm
by Chippy
Wotcha Craig thanks.
Not that much frankly. This one goes for about $65.

I take it then this sort of mic isn't really needed? I don't have the best setup really, working on it of course.
Thanks again Craig.


CraigMaxim wrote:
What's your budget for this mic Chippy.

They are all over the map.

Jimmy is right, that Neumans are among the best vocal mics out there, and his figures are low even. You can pay $3,000 to $5,000 dollars for the top of the lin Neumans.

You can also find a decent condensor mic for $250 or so.

PostPosted: Tue Jan 19, 2010 8:40 pm
by CraigMaxim


$65 is not alot to work with. :(

Do you gig? Plan to gig?

You may consider a standard industry workhorse mic, like those that retail for $99 or so, and they are built to be multi-functional, as well as sturdy, and can be used successfully for shows, but also decent home recordings too.

Shure SM57 or SM58 for example.

Try this article out, which may be helpful:

http://www.tweakheadz.com/microphones_for_the_home_studio.htm


TweakHeadz btw... is an EXCEPTIONAL site for understanding electronic instruments, synths, home recording, looping, whatever!!!

HIGHLY RECOMMENDED SITE!



PostPosted: Tue Jan 19, 2010 10:12 pm
by Chippy
Going with something cheap. I don't even know if I can cut it? Just a voice anyway or in my case a guide vocal.

Thanks